ESS Test Reports for TPD and T-Crate
Documentation
General overview of the tests (.doc)
Detailed test descriptions (.pdf)
Summary of the test results (Preliminary/Incomplete)
Qualification Models QM2
First of all, a big thanks to the excellent support from CSIST/Academia Sinica,
as usual, they gave us all their help needed and had to work overtime more than once to allow us a successful test.
In the following subsections, you get access to all logfiles and produced plots of the individual cycles. A summary of the result can be found in this document (TO BE DONE)
Test of the TPD with the GSE
Before going to the thermal chamber, extensive tests of the TPD with the GSE have been performed.
Before 1st thermal cycle
This was just a dry run of the initial scripts, these scripts still got modified during thermal cycle 1 and 2, so use the results with care! Still, all tests were successful.
Before the 1st thermal cycle
1st thermal cycle
1st thermal cycle at -25 degrees
1st thermal cycle at +55 degrees
1st thermal cycle at +55 degrees (with modified scripts)
Before 2nd thermal cycle
We had to shutdown between cycle 1 and 2 (week-end), so we did again some dry-runs on monday before continuing.
Before the 2nd thermal cycle
2nd thermal cycle
This cycle was used as a dry run for the 'final' version of the test scripts. No furter modifications of the scripts have been applied after this cycle for consistency with the qualification cycles 9 and 10.
2nd thermal cycle at -25 degrees
2nd thermal cycle at +55 degrees
9th thermal cycle
First qualification cycle.
9th thermal cycle at -25 degrees
9th thermal cycle at +55 degrees
10th thermal cycle
Second qualification cycle.
10th thermal cycle at -25 degrees
10th thermal cycle at +55 degrees
Before Vibration of the TPD in xy
Dry run of slightly shortened testscripts (for TPSFE and TDR)before vibration of the TPD.
Before TPD vibration in xy
Vibration of the TPD in xy
Contains both test results of the TPD in x as well as in y
TPD vibration in xy
After Vibration of the TPD in xy
After TPD vibration in xy
Vibration of the TPD in z
Test results of the TPD in z-direction.
TPD vibration in z
After Vibration of the TPD in z
After TPD vibration in z
Before Vibration of the T-Crate in z
Before T-Crate vibration in z
Vibration of the T-Crate in z
Test results of the T-Crate in z-direction.
T-Crate vibration in z
Before Vibration of the T-Crate in xz
Before T-Crate vibration in xy
Vibration of the T-Crate in xy
Test results of the T-Crate in xy-direction.
T-Crate vibration in xy
After Vibration of the T-Crate in xz
After T-Crate vibration in xy
Before 11th thermal cycle
To crosscheck the performance of the equipment after moving to thermal chamber again.
Before the 11th thermal cycle
11th thermal cycle
Test of the equipment during thermal cycling, just to be sure everything works.
11th thermal cycle at -25 degrees
11th thermal cycle at +55 degrees
14th thermal cycle
3rd qualification cycle.
14th thermal cycle at -25 degrees
14th thermal cycle at +55 degrees
15th thermal cycle
3rd qualification cycle.
15th thermal cycle at -25 degrees
15th thermal cycle at +55 degrees
After all thermal cycles
Final verification at the end of ESS.
After all thermal cycles
Test of the TPD with the GSE
After thermal cycling, vibration and the 2nd thermal cycling, the TPD was again checked with the GSE.